Competitors Gear Requirements

All equipment must follow these guidelines. Failure to comply will result in the riders entry being forfeited.

  1. Any rider competing in an event must use a full-face helmet legally bearing a sticker or QR code confirming the following rating:
  2. SNELL M 2020
  3. UNECE 22.05 or 22.06 Type P
  4. JIS T8133 2015 Type 2 Full face
  5. Sticker or QR code must be easily visible and clear from damage

  6. Rider’s helmet must be in new condition, free from any damage, and less than five (5) years old.
  7. A non-damaged visor must be fitted and secured in a down position on the helmet.
  8. Cameras and camera mounts are not to be installed on helmets.
  9. Special purpose one piece, motorcycle road racing suits are required.
  10. Motorcycle CE Level 2 back protectors are mandatory and must be worn under the racing suit. 
  11. Motorcycle airbag equipped suits and vests are not mandatory but are highly recommended. If the air suit or vest does not incorporate a CE Level 2 back protector a supplemental CE L2 back protector is required.  
  12. Leather gloves must be worn and cover the cuff of the suit sleeve.
  13. Leather or synthetic boots that sit at least 8” above the ankle and specifically made for motorcycle road racing must be worn.
  14. Skin shall not be visible on the rider’s body, except for the rider’s neck.  
  15. All of the riders’ equipment mentioned above must be worn whenever they are on the track.
  16. All of the rider’s personal equipment may be inspected at technical inspection before the rider may take part in any on-track activity.  
  • If any of the clothing shows excessive wear or damage, the series Official may reject that piece of gear from racing use.